Trusted Factory For Chinese Brand Truck Combination Meter Parts

Combination Meter

Because there are many kinds of spare parts, we can't display them all on the website. Please feel free to contact us for specific ones.

advantage

1. We supply both original and aftermarket products for you 2. From the manufacturer to the customer directly, saving your cost 3. Stable stock for normal parts 4. In Time Delivery Time, with competitive shipping cost 5. Professional and on time after service

packing

Carton Boxes, or according to clients’ request.

description

Commonly used combination meters in automobiles are: 1. Tachometer: This displays the engine speed in revolutions per minute. The actual speed is multiplied by 1000 by the reading of the pointer on the meter. White = normal zone, red = dangerous zone. In order to improve economy, try to drive at a lower engine speed in all gears and keep the vehicle speed stable. When the tachometer is in the red zone, do not operate the engine to prevent damage. 2. Speedometer: This is used to display the speed of the car, that is, the number of kilometers per hour. 3. Odometer: This is used to record the total kilometers traveled by the car. 4. Itinerary: This is used to record the number of kilometers the car travels in a certain period of travel. If you reset it, press the button under the speedometer to reset it to zero and record again. 5. Battery charge indicator: It will light up briefly when the ignition switch is turned on, but it will go out after the engine starts to run. 6. Brake system failure indicator: it will light up when the brake fluid level is too low, and it should be checked and repaired immediately. If the ignition switch is turned on or the parking brake works, the indicator will light up to check whether the indicator is normal. 7. Fuel level indicator: When the pointer reaches the red zone, it indicates that the fuel tank is almost empty and should be refueled immediately. Uphill, acceleration, emergency braking or sharp turns will cause the fuel level indicator to fluctuate. Therefore, in order to obtain an accurate indication of the amount of fuel stored, it is best to leave the car in a stopped or relatively stable state. 8. Engine control system indicator: The light is on after the ignition switch is turned on, but it will go out after the engine is started. The injection timing, ignition, idling and deceleration and fuel cut are all electronically controlled. If the light is still on when the car is moving, the system may be malfunctioning. At this time, the system will switch to the emergency program to allow the car to continue driving, but it should be found as soon as possible Special after-sales service center. Do not drive for a long time when the warning light is on, otherwise it may damage the catalytic converter and increase fuel consumption. 9. The headlight high beam indicator will light up when the high beam is activated. 10. Seat belt indicator: It will light up if the seat belt is not worn while driving. 11. Turn signal indicator lights: When the turn signal joystick is moved, these indicator lights flash rhythmically. If the indicator lights flash faster than normal, there may be a problem with one of the turn signal lights. When the hazard warning is activated, such as a vehicle malfunctioning or a trailer after an accident, the malfunction warning light should be turned on, and the turn signal light should flash together. 12. Oil pressure indicator: It lights up when the ignition switch is turned on, but goes out when the engine is running. If the light keeps on, the engine should be turned off immediately, because the lubrication system may be faulty and needs to be overhauled. 13. Engine coolant temperature indicator: also called "water temperature gauge". Always pay attention to this indicator, because once the engine overheats, it may cause serious damage to the engine. Under normal circumstances, the pointer is at the left end of the scale, and the engine has not reached normal operating temperature (cold); the pointer is in the center of the scale, and the engine has reached normal operating temperature (normal); the pointer is in the red zone, indicating that the engine is overheated, and the engine should be shut down immediately and the radiator should be checked Is there a lack of coolant 14. ABS indicator: flashes for a few seconds when the ignition switch is turned on. If the light does not go out after starting or the light is still on when driving, the ABS may be malfunctioning, but the service brake of the car can still work normally. Of course, if the brake and the turn signal indicator fuse are faulty, the ABS will also work, and it should be repaired as soon as possible. 15. Airbag indicator: After the ignition switch is turned on, it will light up for about 4 seconds, and then go out. If the indicator does not light up or stays off or the car is still on when driving, it indicates that the airbag is malfunctioning and should be checked and repaired immediately. In addition to warning lights, some cars also use audio warning signals. For example, when the radio switch or the car light switch is not turned off, when the driver removes the ignition switch key to open the car door, the buzzer will send out an alarm signal to remind the driver.

Combination Meter for Chinese Brand Truck spare parts

Products Details

Combination Meter

advantage

packing

description

Featured Products

Contact us